Here's a new Set of Main Bearings (+020 Size) for the following models from Triumph -

TRIUMPH

Triumph TR5 (2.5 Litre)   (2498cc)     (1967- 69)

Triumph TR6 (2.5 Litre)   (2498cc)     (1969- 74)

Check you still have the correct engine fitted - Eng Prefix No/ CP, CR.

These are +020 size. 

Before you buy this you need to find out / understand the following -

1) These are Main Bearing Shells, that's not the same as Big End Shells.

2) These are +020 size - Find out what size you need.

3) Check your Engine Number against the above, it's just below the rear most Spark Plug - Triumph's often have other engines fitted.

Here's a new Water Pump & Gasket for the following 6 Cylinder models from Triumph-

TRIUMPH

Triumph TR250      (1967- 69)

Triumph TR5         (1967- 69)

Triumph TR6        (1969- 76)

***    NOT AVAILABLE TO NORWAY , SWITZERLAND, MALTA , CYPRUS  ***

Here's a NEW set of CAM FOLLOWERS (x8) for the following 6 cylinder Triumph models  -

TRIUMPH

Triumph TR5

Triumph TR6

There are 12 Cam Followers here which is enough for one engine.

Here's a new Timing Chain Kit for the following models from Triumph -

TRIUMPH

Triumph TR4a  (1965- 67)

(Suits 1991cc & 2138cc)

Included in this kit it the following -

Timing Chain
Oil Seal
Tensioner
Gasket
 

You need this kit for any engine rebuild, the oil seal will have gone hard and the timing chain will have stretched making it noisey and more likely to break.

Here's a new Rocker Cover Gasket for the following 6 Cylinder models from Triumph-

TRIUMPH

Triumph TR5       (1967- 69)

Triumph TR250   (1967- 69)

Triumph TR6      (1969- 76)

Here's a new Lower Gear Lever Rubber Gaiter for the following models from Triumph -.

TRIUMPH

Triumph TR4a      (1965- 67)

Triumph TR5        (1967- 69) 

Triumph TR6       (1969- 76)

(** This is the lower Gearlever Gaiter - See the Diagram for where it fits **).

(** Not for the earlier TR4 of 1961- 65 **)

(The Background Diagram is not Included and is no longer available. It's not fitting instructions and does not indicate the originality of the parts or which cars they will or wont fit - See the Text).

Here's a new car set of Front Road Spring Isolator Rubbers (x4) (x2 Upper & x2 Lower) for the following models from Triumph -

TRIUMPH

Triumph TR4a        (1965- 67)

 (These fit on the Top & Bottom of the Front Road springs as shown in the picture).

(NOTE- Some models may or may not have an Aluminium Spacer on top of the spring as pictured - You'll still need a rubber pad there). 

(**The Background picture is not included and is no longer available. It will not be supplied even if asked for. It is not fitting instructions & does not indicate the originality of these parts or which cars they will or will not fit - See the text**).