Here's a new Sump Gasket Set for the following models from Morris -

MORRIS

Morris 8  (Ser.1,2&E)    (1935- 48)  

(** Side Valve 918cc **) 

Here's a pair of new Front Brake Hoses (x2) for the following models from Morris -

MORRIS

Morris 8 (Ser. E Only)  (From 1939- 48) 

(** Not for the earlier Morris 8 Ser 1 & 2 **)

Morris 8 (Ser. Z Van)    (From 1939- 50 Only) 

(** Only up to Ch.40,816, it's different from 1951- 53)

Here's a new Clutch Release Bearing (With Fitting Clips x2) for the following models from Morris -

MORRIS

Morris 8  (Seri. 1 & 2)    (1935- 38)                

Morris 8  (Ser. E)          (1938- 48)    

Here's a new Rear Brake Hose (x1) for the following models from Morris -

MORRIS

Morris 8 (Ser. E Only)      (From 1939- 48) 

(** Not for the earlier Morris 8 Ser 1 & 2 **)

Morris 8 (Ser. Z Van)      (From 1939- 50 Only) 

(** Only up to Ch. 40816, it's different from 1951- 53)

Here's a new pair of Universal Joints (x2) for the following models from Morris -

MORRIS

Morris 8             (1935- 48)

(Includes Ser.1,2 E & Z Van)

These come complete with all the required circlips so it's an easy fitting job -

Symptoms of worn joints are - A 'clonk' noise under power / pulling away OR continued clonking if the joints have deteriorated badly.

Here's the exact measurements of the joints -

Cup diameter 2.382cm, Joint Diameter 6.130cm

Here's a new Front OR Rear Brake Wheel Cylinder (x1) (7/8") for the following models from Morris-

MORRIS

Morris 8 Saloon  (Ser. 1 ,2 & E)       (1935- 48)

Morris Z Van                                     (1939- To About 1951)  

(** For Z Van - See Note Below **) 

(** Morris Z Van - Suits front & rear for models up to about 1951 which will have x1 Steel Wheel Cylinder on each Wheel. If you've got a later 51-53 model then you'll have x2 Aluminium wheel cylinders on each Front each and completely diferent Aluminium cylinders on the rear - These won't fit either the front or rear of later Z Vans of 1951- 53).

If you want enough for the font AND rear brakes then change the quantity to x4 at checkout.

(Original Part Number was Lockheed 3905 OR 12875). 

(The background picture is not included and is no longer available, it’s not fitting instructions and does not indicate the originality of these part or which cars this part will or won’t fit – See the Text).