Here's a new Rear Wheel Bearing Kit (x1) for the following models from MG -

MG

MGC 3.0            (1967- 69)

Here's a new pair of new Rear Damper Drop Links (x2) for the following models from MG -

MG

MG B (1800cc)  (1962- 74 Only )       (** Chrome Bumper Only **)

(** Not for later Rubber bumper Models **) 

These are the same left and right, suits the GT or Roadster. 

Replace them both for the price.

Here's a new pair of Rear Axle Rebound Straps (x2) for the following models from MG-

MG

MG B (GT or Roadster)   (**1962- 74 Only**)

(**Chrome Bumper Models Only**)

Here's a new Clutch Kit for the following models from MG -

MG

MG C  (3.0 Litre)          (1967- 69)

(**  This is not the same as the MGB, V8 3.5 Litre)

This is a 3 piece Clutch Kit, included are the clutch cover, clutch plate and release bearing.

***    NOT AVAILABLE TO NORWAY , SWITZERLAND, MALTA , CYPRUS  ***

Here's a new Threaded Oil Filter Adaptor for the following models from MG -

MG

MG Midget 1500     (Dec 74- 79)

This fits between the oil filter and the block -

Here's a new Sump Gasket Engine Set (Conversion Set) for the following 4 Cylinder models from MG -

MG

MG Midget Mk3 (1275cc)     (1966- 74)

Here's a new set of Front Brake Pads for the following models from MG -

MG

MGB GT  (1800cc)      (1962- 80)

(Not MGB V8  or MGC 3.0)

Here's a new Core Plug Set for the following 4 cylinder models models from MG -

MG

MG A     (All MGA's)

These plugs are pressed into the engine block to fill up holes left when manufacturing the engine.

After a long time they rust and you start to leak water, if you keep your car full of Anti-Freeze this helps protect them against rust.

It's very easy to change these, to remove the old ones you knock a sharp scredriver through the old core plug and lever it out. You then press the new core plug into the block, put a flat bit of wood over if and hit it home! (You'll need to drain the water out of the engine / radiator first!).

Here's a new Snail Cam Brake Adjuster (x1) for for the following models from MG -

MG

MG Magnette ZA & ZB    (1953- 58 Only)

(Not for the later Magnette Mk4 & Mk4 which have Girling Brakes)

As you can see in the picture the 'Mask' is included with the Snail Cam.  

The adjuster is shown fitted onto the end of a Brake Shoe, that Brake shoe is not included in the price.

There are  x6 of these on a car - That's x4 on the Front Brakes (x2 per wheel).

You can buy any amount from 1 - 6. 

(The background picture is not included and is no longer available, it’s not fitting instructions and does not indicate the originality of these part or which cars this part will or won’t fit – See the Text).

Here's a new set of Front Brake Wheel Cylinders (x4) for the following models from MG -

MG

MG TD     (1950- 53)

MG TF     (1953- 55)

These are the same left and right.