Here's a new Head Gasket Set & Sump Gasket Set (ENGINE GASKET SET) for the following models from Ford -

FORD

Ford Cortina Mk1 1200

(113e & 114e) (1198cc) (1962-68) (Pre X-Flow)

Ford Cortina Mk1 1500

(118e & 119e) (1498cc)  (1963- Aug 66)

Ford Cortina Mk1 1500GT

(118e & 119e) (1498cc) (1963-Aug 66)

(Manifold Gasket is different on the GT, rest of it is correct)

Here's a new Clutch Master Cylinder & Slave Cylinder (3/4") for the following models from Ford -

FORD

Ford Cortina Mk1   (1200cc, 1500cc & GT)      (1962- 66)

(** Not for Lotus Models which uses a Large Bore slave cylinder **)

(** Not for Cortina Mk2 **)

(** DON'T BUY THIS FOR THE ELAN OR LOTUS CORTINA - IT IS NOT THE SAME **)

(** DON'T BUY THIS FOR THE CORTINA Mk2 - IT WON'T FIT. YOU WILL BE WASTING YOUR TIME **)

Here's a new Air Filter (x1) for the following models from Ford -

FORD

Ford Cortina Mk1 (1200cc & 1500cc)       (1962- 66)

(**Not for the 1500GT model**)

(**Not for any Lotus Cortina model *)

(You require x1 Air Filter per car).

Here's a new pair of Front Brake Hoses (Stainless Steel Braided) (x2) for the following models from Ford -

FORD

Ford Cortina Mk1 (1962- 64)

(** With Front Drum Brakes**)

Here's a new set of Front (x4) & Rear (x2) Brake Wheel Cylinders (With Gaiters & Fitting Clips) for the following models from Ford -

FORD

Ford Cortina Mk1 (1200 & 1500) (1962- 66)

(**With Front Drum Brakes**)
 

These are new items and you get two left and two right on the front and a pair for the rear so you can replace all the cylinders at once.

Here's a new set of Inner & Outer Track Rod Ends (x4) for the following models from Ford -

FORD

Ford Cortina Mk1           (1962- 66)

(All Models Including GT & Lotus)

The inner and outer Track Rod Ends are threaded in different directions.

Here’s a new Rear Brake Adjuster (x1) for the following models from Ford–

FORD

Ford Cortina Mk1  (1962 - Oct 66)

(** Not for the GT or Lotus **)

You need one per wheel, you are bidding for one here.

(These will only suit the REAR brakes, not for the front drums)

Here's a new Brake Master Cylinder (5/8") for the following models from Ford-

FORD

Ford Cortina Mk1 (1200 & 1500)  (1962- 64)

(** With Front Drums **)

Rod can be removed and swapped if required.

Better Quality than all the others i have seen listed - Look at the picture....

Here's a new Water Pump With Gasket & Fan Belt for the following models with a (Pre X-Flow) from Ford -

FORD

Ford Cortina Mk1  (1200, 1500 & GT)    (1962- 66)

(** Excluding Lotus Cortina Mk1 **)

(Dynamo Models Only)

Here's a new pair of Front Copper 'Bridging' Brake Pipes (x2) for the following models from Ford -

FORD

Ford Cortina Mk1 (1200 Only)           (1962- 64)

(** With Front Drums ** )

Not for the 1500 which used large Front Drums.

These pipes join the Front Wheel Cylinders to each other on each front wheel.

These are made from copper which has been Flared professionally and have Brass unions fitted.

Note - I'll bend these a bit when I post them 

Here's a new Front Wheel Bearing Kit (x1) for the following models with Front Drum Brakes from Ford -

FORD

Ford Cortina Mk1     (1962- Oct 64)

(1200cc, 1500cc Only) 

(** Only for Front Drum Brake models **)

(** Not for Front Disc Brakes models **)

Here's a new pair of Rear Axle Inner Oil Seals (x2) for the following models from Ford -

FORD

Ford Consul Capri Classic  (1961-  64)

(109e & 116e)

(Suits 1340cc, 1500cc & 1500GT)

These oil seals are fitted behind the wheel bearings - So you have to take out the wheel bearings to change them.

Here's an IGNITION COIL, it is a non Ballast 12v coil and suits the following models from Ford -

(Colour may vary between Black or Silver)

FORD

Ford Anglia 105e  (1959- 68)

(Lucas Ignition - Not Autolite)

 Triumph Spitfire Mk1 (1147c

The function of this coil is to generate the 000's of volts required by your spark plugs, they deteriorate with age and the insulation between the wires inside can breakdown and therefore the coil needs replacing once in a while.

Here’s a new Ignition Tune Up Kit for the following models from Ford -

FORD

Ford Anglia 105e    (1966- 68)

(Note : Only for Anglias after 1966 with a 'Top Entry' cap & Lucas distributor)

(Note : Not for Anglias with optional Autolite Distributor fitted from 1966- 68).

These models have a Lucas 4 Cyl distributor.

This kit includes the following parts -

Distributor Cap

Points

Rotor Arm

Condenser

Here's a new Timing Chain for the following models from Ford -

FORD

Ford Zephyr Mk3   (4 Cyl & 6 Cyl)   (1703cc & 2553cc)   (1962- 66)

Ford Zodiac Mk3   (4 Cyl & 6 Cyl)   (1703cc & 2553cc)   (1962- 66)

** This listing is for the Timing Chain Only **

Here's a new pair of Universal Joints (x2) for the following models from Ford-

FORD

Ford Zephyr / Zodiac Mk3 3.0       (1962- 66)  (**Circlip Type Only**)

Ford Zephyr / Zodiac 4 Mk3 1.7    (1962- 66)  (**Circlip Type Only**)

Ford Zephyr / Zodiac 6 Mk3 2.5    (1963- 66)  (**Circlip Type Only**)

These come complete with all the required circlips so it's an easy fitting job -

Symptoms of worn joints are - A 'clonk' noise under power / pulling away OR continued clonking if the joints have deteriorated badly.

Here's the exact measurements of the joints -

Cup diameter 2.382cm, Joint Diameter 6.130cm

Here's a new pair of Front Brake Caliper Pistons (x2) for the following models from Ford -
 

FORD

Ford Zephyr Mk2      (1960- 62)

Ford Zodiac Mk2       (1960- 62)

Ford Zephyr Mk3      (1962- 66)

Ford Zodiac Mk3       (1962- 66)

Ford Zephyr IV          (1966- 70)

Ford Zodiac IV          (1966- 70)

(** Type 16p Calipers Only **)

(You must identify your caliper type, if you take out the brake pads and look at the pistons you'll see they are surrounded by a rubber ring. If that rubber ring is held in place by a metal clip then these won't suit, also you can see in the photos the rubber ring I'm pointing to is quite thick).

You get a pair of Pistons here which is enough pistons to repair x1 caliper, quite easy to fit as well!

Please change the quantity to x2 if you want to replace the Pistons for both Calipers.

The Background picture shows a caliper with the Bellows Type Seal to help you identify your caliper type.

Here's a new set of Front Anti Roll Bar Mounting Bracket Bushes (x4) for the following models from Ford- 

FORD

Ford Zephyr Mk3        (1966- 66)

Ford Zodiac Mk3        (1966- 66)

The Background picture is shown only to indicate where the parts fit on the models given in the description.

Please dont be the first bozo to try to fit these into the Track Control Arm or anywhere else on the car other than where I've described & pictured above.

The backgroung picture is NOT included and will NOT be supplied even if asked for. It's not fitting instructions and does not indicate the originality of the parts of what cars they will or wont fit - See the Text.

Here's a new Front Wheel Hub Bearing Kit (x1) for the following models from Ford -

FORD

Ford Zephyr Mk3         (1962- 66)

Ford Zodiac Mk3         (1962- 66)

Ford Zephyr MkIV       (1966- 72)

(1.7, 2.0, 2.5, 2.6, 3.0) 

(**Not for earlier Mk1 & Mk2 models **)

Here's a new pair of Front Engine Mounts (x2) for the followinmg models from Ford -

FORD

Ford Consul Capri Classic   (109e & 16e) (1961- 64)

(1340cc & 1500cc)

Here's a new pair of Front Engine Mounts (x2) for the following models with a Pre X-Flow Engine from Ford -

FORD

Ford Prefect 107e / 108e   (From 1959- 62 Only)

The above model is the 100e shaped car but with the OHV engine.

Not for anything else in the 100e range which has a Side Valve engine.

** DO NOT BUY THESE FOR ANYTHING WITH A SIDE VALVE 1172cc ENGINE IN IT **

** DO NOT BUY THESE FOR ANYTHING WITH A SIDE VALVE 1172cc ENGINE IN IT **

** DO NOT BUY THESE FOR ANYTHING WITH A SIDE VALVE 1172cc ENGINE IN IT **

Here's a new Brake Master Cylinder Repair Seals Kit (13/16", 20.6mm) for the following models from TVR -

TVR

TVR Tasmin      (1979- 90)

(280, 350, 390, 420 & 450)

To help you identify, this kit does all the following master cylinders as long as the Casting Number AND Plastic Tag are both correct. 

The Tag denotes the Bore, if it's missing then measure it - Should be (20.6mm / 0.812").   

74660220 Tag 66026

74660294 Tag 66099

74660294 Tag 66138

74660294 Tag 66144

74660294 Tag 66146

74662094 Tag 66161

74660220 Tag 66171

74660220 Tag 66195

74660294 Tag 66197

74660294Tag 66200

74660294 Tag 66231

(The diagram in the background is not included).

Here's a new pair of Front Stainless Steel Braided Brake Hoses (x2) for the following models from Ford -

FORD

Ford Zephyr MkIV    (1966- 72)

(Suits V4 & V6 versions)

Ford Zodiac MkIV    (1966- 72)

(Suits V4 & V6 versions)

You are bidding for a pair of Stainless Steel Braided hoses here.  

Here's a new pair of new Front Brake Hoses (x2) (With Springs) for the following models from Ford -

FORD

Ford Zephyr MkIV    (1966- 72)

(Suits V4 & V6 versions)

Ford Zodiac MkIV    (1966- 72)

(Suits V4 & V6 versions)

Here's a new Brake Master Cylinder Repair Seals Kit (19.0mm) (0.75") for the following models from Ford -

FORD

ECORT MK2 SALOON

Ford Escort Mk2 1.1, 1.3, 1.6  (** From Mar 77- 80 **)

1. Discs with No Servo
2. Drums with No Servo
3. Discs with Servo

(ie Not for Drums + Servo model - See my other listing)

Only these combinations during these dates. Earlier master cylinders are 20.6mm.

ESCORT MK2 ‘35’ VAN

Ford Escort Mk2 35 Van 1.1 & 1.3 (** From Aug 77- Sep 78 Only **)

(With Front Discs, With or Without Servo).

Ford Escort Mk2 35 Van 1.1 & 1.3 (** From Oct 78- 80 Only **)

(With Front Discs and With Servo).

ESCORT MK2 ‘45’ VAN

Ford Escort Mk2 45 Van 1.1 & 1.3 ( **From Aug 77- Sep 78**)

(Without Servo)

Ford Escort Mk2 45 Van 1.1 & 1.3 (** Frmo Oct 78- 80 **)

(With Servo)

(** Girling Master Cylinders Only  - Identified by numbers of format / similar to 746xxxxxx   - Not for ATE Cylinders **)

To help you identify, this kit does all the following Master Cylinders as long as the Casting Number AND Plastic Tag are BOTH correct. 

The Tag denotes the Bore. If it's missing then measure it - Should be (19.0mm) (0.75").   

74660220 Tag 66019

74660038 Tag 66035

74660182 Tag 66104

74660294 Tag 66137

74660294 Tag 66145

74660220 Tag 66170

74660182 Tag 66173

74660038 Tag 66194

74660220 Tag 66196

74660294 Tag 66204

74660038 Tag 66214

Both these numbers must be exactly right, don't buy this if only one of the numbers is right and then try to fit it to something else - It won't fit.  

Don't buy it just by looking at the pictures - Numbers are everything.

(The diagram in the background is not included).

Here's a new pair of Front Brake Hoses (Stainless Steel Braided) (x2) for the following models from Ford -

FORD

Ford 100e            (Anglia, Prefect & Popular)   (1954- 59)

Ford 107e, 108e  (Anglia, Prefect & Popular)   (1959- 62)

(Only for the 100e shape - Not for the 105e Anglia of 1959- 68)

Here's a new Front Wheel Bearing Kit (x1) for the following models from Ford -

FORD

Ford Popular 100e  (From Oct 59- 62) (** From Ch.783,802 **)

Ford Anglia 100e    (From Oct 59- 62) (** From Ch.783,802 **)

(Not for earlier cars of 1953- 59 in the 100e range)

If you require x2 bearing kits please change the quantity at checkout - Postage will be calculated by the checkout.

Here's a new Clutch Hose (Stainless Steel Braided) for the following models from Ford -

FORD

Ford Prefect 107e & 108e    (997cc)    (1959- 61)

(Pre X Flow Engines Only - Not earlier Side Valve).

Here's a new pair of Universal Joints (x2) for the following models from Ford -

FORD

Ford Anglia 100e       (1953- 59)

Ford Prefect 100e     (1953- 59)

Ford Prefect 107e     (1959- 61)

Ford Prefect 108e     (1959- 61)

Ford Thames Van     (1961- 65)

Ford Popular 100e   (1959- 66)

These come complete with all the required circlips so it's an easy fitting job -

Symptoms of worn joints are - A 'clonk' noise under power / pulling away OR continued clonking if the joints have deteriorated badly.

Here's the exact measurements of the joints -

Cup diameter 2.382cm, Joint Diameter 6.130cm

Here's a new set of Front Brake Wheel Cylinders (x4) for the following models from Ford  -

FORD

Ford Escort Mk1  (1968- 75)

(** Where Front Drums are fitted **)

Here's a new Clutch Master Cylinder Repair Seals Kit (0.7") for the following models from Ford -

FORD

Ford Cortina Mk2   (Oct 66-Sep 67)

(1300,1500, 1600, 1600GT & 1600E)

(Manual LHD & Manual RHD)

(Suits Saloon & Estate)

(The picture in the background is not included and is no longer available)

Here'a new Rear Cross Member Hose (x1) for the following models from Ford -

FORD

Ford Cortina Mk3        (1970- 76)

(1300, 1600 & 2000)

(** This is Rear X-Member hose. It is not a Rear Brake Hose **).

Here's a new set of Front Brake Wheel Cylinders (x4) & Copper Link Pipes (x2) for the following models from Ford  -

FORD

Ford Anglia 105e     (1959- 68)   

(Also 107e, 108e, 123e)

Here's a Brake or Clutch Master Cylinder Repair Kit (5/8") for the following models from Ford -

FORD

Ford Anglia 105e    (1959- 68)

(Suits Brake or Clutch)

Ford Anglia 123e (1965-67)

(Suits Brake or Clutch)

Here's a new Oil Filter for the following models from Ford -

FORD

Ford Anglia 105e   (From 1965- 68)

Not for earlier Anglias of 1959- 64 which had a Paper Element Oil Filter inside a can with a nut on the top.

This is the later Spin-On oil filter.

Here's a new Fan Belt for the following models from Ford-

FORD

Ford Anglia 105e     (997cc & 1200cc)    (1959- 68)

(Dynamo Models Only)

Here's a new Clutch Slave Cylinder Repair Seals Kit (0.75") for the following models from Ford -

FORD

Ford Anglia 105e  (998cc & 1200cc)   (1959- 68)

(Also 307e, 309e & 310e Anglia Vans)

Here's a new set of Rear Brake Wheel Cylinder Horseshoe Fitting Clips (x4) for the following models from Ford - 

FORD

Ford Anglia 105e      (1959- 68)

(997cc & 1200cc)

You get 4 here so that's enough for both sides.

These fit in the outside of the drum and hold the wheel cylinders in place, you will see them i f you put your head behind the rear wheel.

These can rust away or just get broken when you remove them.

Here's a new Clutch Friction Plate (7.25" /. 184mm) (20 Spline) for the following models form Ford -

FORD

Ford Cortina Mk1 (1200, 1500 & 1500GT)       (1962- 66)

(** Not for Lotus Cortina Mk1 Models**)

(** Not for Cortina Mk2 which are all Completely different **)

(**Do Not buy this for any car other than the exact models I've written above**)

Here's a new set of Front Brake Shoes (8" x 1.25") for the following models from Ford -  

FORD

Ford Anglia 105e   (** 997cc Only **)         (1959- 68)

(Suits Saloon & Estate)

(** Not for the 1200cc Anglia which used wider 8" x 1.75" front shoes - Measure first if unsure**).

Here's a new pair of Rear Axle Inner Oil Seals (x2) for the following models from Ford -

FORD

Ford Cortina Mk1  (1962-  66)

(1200, 1500, 1500GT & Lotus)

These oil seals are fitted behind the wheel bearings - So you have to take out the wheel bearings to change them.

Here's a new Rear Wheel Bearing Kit (With Fitting Collar) for the following models from Ford -

FORD

Ford Cortina Mk1   (1.2, 1.5, 1.5GT & Lotus 1600cc)      (1962- 66)

(** Not for the Later Cortina Mk2 of 1966- 70 **)

If you have a Kit Car / Modified Car or are unsure then get your old bearing out to compare....

This bearing has no Rubber O Ring round the outside edge (The later Cortina Mk2 bearing does).

This bearing sticks out either side where the central shaft goes in. (The later Cortina Mk2 bearing sticks out only a little bit on one side)

Here's a new Air Filter (x1) for the following models from Ford -

FORD

Ford Anglia 105e (997cc)    (1959- 68)

Ford Anglia 123e (1200cc)  (1959- 68)

(**You require x1 Air Filter per car**).

Here's a new Front Wheel Bearing Kit (x1) for the following models from Ford -

FORD

Ford Anglia 105e (Saloon)   (1959- 68)

Ford Anglia 123e (Estate)   (1959- 68)

Here's a new set of Front Brake Wheel Cylinders (x4) for the following models from Ford -

FORD

Ford 400e Thames (Van & Pickup)     (1957- 65)

(Suits 10cwt, 12cwt & 15cwt versions).

Not the same as the smaller Anglia shaped Thames or the larger Thames Trader Lorry.

Here's a new Clutch Slave Cylinder Repair Seals Kit (1") for the following models from Ford-

FORD

Ford 400e Thames (Van & Pickup)     (1957- 65)

(Suits 10cwt, 12cwt & 15cwt Petrol versions).

Here's a new Rear Brake Hose (x1) for the following models from Ford -

FORD

Ford Capri Consul Classic 109e            (1961- 64)

(Includes GT Version).

(Not for the Consul Mk1 Mk2 Mk3 - It's not the same car)

(Only x1 Rear Hose Required per car - If you buy x2 I'll assume you want them and send both).

Here's a new Clutch Master Cylinder (5/8") & Slave Cylinder (3/4") for the following models from Ford -

FORD

Ford Consul Capri Classic (109e & 116e)  (1961- 64)

(1340cc or 1500cc)

(** Not for the Consul Mk2, Mk3, Mk4 **)

(** Not for the Capri Mk1, Mk2, Mk3 **)

(** Don't buy this for anything other than the Capri Consul Classic 109e & 116e - It won't fit, you'll be wasting your time **)

Here's a new Brake Master Cylinder Repair Seals Kit (20.6mm) (0.812") for the following models from Ford -

FORD

Ford Escort Mk2 RS2000                   (Jun 1978- 80)

Ford Escort Mk2 1.1, 1.3 & 1.6         (Aug 1977-  80)

(With Servo and Drums all round - Different Before Aug 77).

Ford Escort Mk2 35 Van 1.1 & 1.3  (Aug 1977- 80)

(With Servo and Drums all round - Different Before Aug 77).

Ford Escort Mk2 45 Van 1.1 & 1.3 (Aug 1977-  Sep79)

(With Servo and Drums all round - Different Before Aug 77).

(** For all the above models ths kit suits Girling Brakes only - Not ATE **)

To help you identify, this kit does all the following master cylinders as long as the Casting Number AND Plastic Tag are both correct. 

The Tag denotes the Bore, if it's missing then measure it - Should be (20.6mm / 0.812").   

74660220 Tag 66026

74660294 Tag 66099

74660294 Tag 66138

74660294 Tag 66144

74660294 Tag 66146

74662094 Tag 66161

74660220 Tag 66171

74660220 Tag 66195

74660294 Tag 66197

74660294Tag 66200

74660294 Tag 66231

(The diagram in the background is not included).

Here's a new Brake Master Cylinder Repair Seals Kit (20.6mm) for the following models fitted with a Servo and ATE Brakes from Ford -

FORD

Ford Escort Mk2 RS1600    (1.6 OHC Engine)     (Oct 78- 80) 

(**With Servo**) (**With OHC**) (**With ATE Brakes - Not Girling**)

Ford Escort Mk2 RS2000    (2.0 OHC Engine)   (Oct 78- 80)

(**With Servo**) (**With OHC**) (**With ATE Brakes - Not Girling**)

(That means it won't suit a Escort with Girling Brakes).

(That means it won't suit a Escort with no Servo).

(That means it won't suit an Escort with an OHV engine).

Don't buy this for any old Master Cylinder you got from a jumble sale or any other Ford - It's specifically for the above models.

Phone me if you think you need a different kit.

The picture does not indicate these parts are genuine - It's to stop people buying this part for Girling brakes and to show you the logo to look out for stamped on your Master Cylinder.

Here's a new set of Rear Brake Shoes (8"x1.25") for the following models from Ford -

FORD

Ford Anglia 105e (997cc Only)        (1959- 68)

(** Only Suits 997cc versions of the Saloon & Estate **)

(** Not for the Super Anglia 1200 or the Super Anglia Estate 1200 which use wider 1.5" inch rear shoes).

Here's a new Head Gasket Set for the following models with X Flow, OHV engines with Weber Carbs from Ford -

FORD

Ford Cortina Mk2 1300       KL13                   (1968- 70)

Ford Cortina Mk2 1600GT (2737e)                (1967- 70)

Ford Cortina Mk2 1600GT 3036e  LK16H     (Aug 67- Aug 70)

Ford Cortina Mk2 1600e 3036e  LK16H        (Aug 67- Aug 70)

Here's a new Sump Gasket Set (Conversion Set) for the following models with Pre X Flow Engines from Ford -

FORD

Ford Cortina Mk1 1200      (1198cc)   (1962-66)

Ford Cortina Mk1 1500      (1498cc)   (1963- 66)

Ford Cortina Mk1 1500GT (1498cc)   (1963- 66)

Ford Corsair 1500GT (120e & 121e)  (1963- 65)

Here's a new Servo Repair Kit for the following models fom Ford -

Note - This is quite a basic kit, the main rubber diaphram is not included. That's the one that is about 6" or 7" diameter.

FORD

Ford Zephyr 6 & Zodiac Mk4

(Oct 66- Sep 68 Only)

Here's a new pair of Front Brake Discs (x2) (247mm) for the following models with Front Disc Brakes from Ford-

FORD

Ford Zephyr Mk2    (Sep 60- 62)

Ford Zodiac Mk2    (Sep 60- 62)

Ford Consul Mk2   (Sep 60- 62)

(** Not for earlier Zephyr Zodiac Consul Mk2’s which had Front Drums**)

(**Not for the Ford Consul Capri Classic 109e / 116e of 1961- 64**).

Look at the other sellers who can only show a Generic Picture of these discs - Do you believe they know what they're doing and have the right discs? I don't.

NOTE - When you look a the Zephyr Mk2 / Mk3 you'll see there are 5 studs to bolt the wheel onto the outside of the hub. The discs bolt onto the back of the hub - So it is correct the disc has 4 holes.

Read and understand the description, know which car you have. 

** NOT AVAILABLE TO CANARIES, MALTA, MADEIRA UNLESS YOU CONTACT ME FIRST – IDEALLY BY PHONE*

Here's a Fan Belt for the following models from Ford-

FORD

Ford Consul Capri Classic (109e, 116e)     (1961- 64)

(1340, 1500 & GT)

(Dynamo Models Only)

The Brand / Packing may differ from the photo depending on what the supplier sends me - 

Here's a new pair of Front Engine Mounts (x2) for the following models from Ford -

FORD

Ford Anglia 105e    (997cc)          (1959- 68)

Ford Anglia 123e    (1200cc)       (1959- 68)

Ford Anglia Van 307E

Here's a new pair of Universal Joints (x2) for the following models from Ford -

FORD

Ford Anglia 105e         (1959- 68)

Ford Anglia 106e 1.0    (1959- 68) (Van also)

Ford Anglia 123e          (1959- 68)

Ford Anglia 124e 1.2    (1959- 68) (Van also)

These come complete with all the required circlips so it's an easy fitting job -

Symptoms of worn joints are - A 'clonk' noise under power / pulling away OR continued clonking if the joints have deteriorated badly.

Here's the exact measurements of the joints -

Cup diameter 2.382cm, Joint Diameter 6.130cm

Here's a pair of new Rear Handbrake / Wheel Cylinder Gaiters (x2) for the following models from Ford -

FORD

Ford Anglia 105e        (1959- 68)
 

These fit on the rear Brake Drums where the Handbrake Cable joins and where the Brake Hose joins the Wheel Cylinder, you can see them in the photograph.

These are made of rubber.

For those of you who want to fit these to kit cars they are 7.7cm long and 3.2cm wide.

Is is sensible to replace these at the same time as the the wheel cylinders.

Here's a new pair of Rear Axle Inner Oil Seals (x2) for the following models from Ford -

FORD

Ford Anglia 105e   (1959-  68)

(Suits Saloon & Van)

These oil seals are fitted behind the wheel bearings - So you have to take out the wheel bearings to change these Oil Seals.

NOTE - This Oil Seal works with the Early and Late type axles fitted to Anglias.

Here's a set of new Front Brake Shoes for the following models from Ford -

FORD

Ford 400e Thames Van        (1957- 65)