Here's a new Rear Wheel Bearing Kit (x1) for the following models from Morris -

MORRIS

Morris Oxford MO        (1949- 54)

Here's a new Rear Hub Wheel Bearing Kit (x1) including Oil Seals - for the following models from Morris-

MORRIS

Morris Isis (2.6 Litre)   (Ser.1 & 2)  (1953- 56)

Here's a new Clutch Fork Arm Gaiter for the following models from Austin -

AUSTIN

Austin A40 Cambridge             (1954- 56)

Austin A50 Cambridge             (1954- 57)

Austin A55 Cambridge Mk1     (1957- 59) 

Austin A55 Cambridge Mk2     (1959- 61) 

Austin A60 Cambridge            (1961- 71) 

(Suits 1200, 1500 & 1622 versions of the above models).

(** Not for the earlier A40 Devon, A40 Dorset, A40 Somerset or Jensen A40 Sports or the later A40 Farina**).

Here's a new Head Gasket Set & Sump Gasket Set (ENGINE GASKET SET) for the following models from Morris-

MORRIS

Morris Cowley 1200cc      (1954- 55)

Morris Cowley 1500cc      (1955- 59)

Here's a new Head Gasket Set & Sump Gasket Set (ENGINE GASKET SET) for the following models from Morris-

MORRIS

Morris Oxford Ser 2                (1489cc)      (1954- 56)

Morris Oxford Ser 3                (1489cc)      (1956- 59)

Morris Oxford Ser 4 Estate   (1489cc)      (1957- 60)

Morris Oxford Ser 5               (1489cc)      (1959- 61)

Morris Oxford Ser 6              (1622cc)      (1961- 66 Only) (** Different from 66 **)

Here’s a new Head Gasket Set for the following models from Morris-

(B Series Engines 1500cc & 1600cc)

MORRIS

Morris Oxford Ser 2                (1489cc)      (1954- 56)

Morris Oxford Ser 3                (1489cc)      (1956- 59)

Morris Oxford Ser 4 Estate   (1489cc)      (1957- 60)

Morris Oxford Ser 5               (1489cc)      (1959- 61)

Morris Oxford Ser 6              (1622cc)      (1961- 66 Only) (** Different from 66 **)

(Not for 1600's with Engine Numbers 16AA, 16GF which are 5 bearing crank from 1966- )

Contains all the gaskets required to remove / Replace the Cylinder Head.

Check your engine number if you have the 1600cc. 

Here’s a new Engine Set of Piston Rings (STD, 5 Ring Type, 0.063"Wide) (Made in the USA by Grant) for the following models from Morris –

(1489cc Engines Only)

MORRIS

Morris Oxford (Ser 2 3 4 5)          (1954- 61 Only)

*** These cars were fitted with either 4 Ring Pistons or 5 Ring Pistons. Get them out and look. This set is for the 5 Ring Pistons ***

*** These cars were fitted with a choice of two compression ring widths, either 0.063" or 0.078". Get them out and measure. This set is the for the 0.063"wide compression rings **

*** This set is STD (Standard Size), ensure you know the size you require before ordering **

This set contains four times - 

x3 Compression Rings 0.063" wide.

x2 Oil Rings 0.156" wide

The picture shows them in their packet as they are all in order. 

Here’s a new Engine Set of Piston Rings (STD, 5 Ring Type, 0.063"Wide) (Made in the USA by Grant) for the following models from Morris –

(1489cc Engines Only)

MORRIS

Morris Cowley 1500             (1956- 58) (Not Cowley 1200)

*** These cars were fitted with either 4 Ring Pistons or 5 Ring Pistons. Get them out and look. This set is for the 5 Ring Pistons ***

*** These cars were fitted with a choice of two compression ring widths, either 0.063" or 0.078". Get them out and measure. This set is the for the 0.063"wide compression rings **

*** This set is STD (Standard Size), ensure you know the size you require before ordering **

This set contains four times - 

x3 Compression Rings 0.063" wide.

x2 Oil Rings 0.156" wide

The picture shows them in their packet as they are all in order.