Here's a new set of Front Brake Wheel Cylinders (x4) & Copper Link Pipes (x2) for the following models from Ford  -

FORD

Ford Anglia 105e     (1959- 68)   

(Also 107e, 108e, 123e)

Here's a Brake or Clutch Master Cylinder Repair Kit (5/8") for the following models from Ford -

FORD

Ford Anglia 105e    (1959- 68)

(Suits Brake or Clutch)

Ford Anglia 123e (1965-67)

(Suits Brake or Clutch)

Here's a new Clutch Slave Cylinder Repair Seals Kit (0.75") for the following models from Ford -

FORD

Ford Anglia 105e  (998cc & 1200cc)   (1959- 68)

(Also 307e, 309e & 310e Anglia Vans)

Here's a new Brake or Clutch Master Cylinder (5/8") for the following models from Ford -

FORD

Ford Anglia 105e  (1959- 68)

(Suits Saloon / Van / Estate & Super Anglia)

You might want x2 of these as they suit the Clutch and Brake Master

Correct 5/8th bore & correct thread for the pipe.

NOTE- You will have to swap and re-use the old Pushrod. It's only hel ionm place by a circlip.

Better Quality than all the others i have seen listed - Look at the picture....

Here's a pair of new Rear Handbrake / Wheel Cylinder Gaiters (x2) for the following models from Ford -

FORD

Ford Anglia 105e        (1959- 68)
 

These fit on the rear Brake Drums where the Handbrake Cable joins and where the Brake Hose joins the Wheel Cylinder, you can see them in the photograph.

These are made of rubber.

For those of you who want to fit these to kit cars they are 7.7cm long and 3.2cm wide.

Is is sensible to replace these at the same time as the the wheel cylinders.

Here's a new set of Rear Brake Wheel Cylinder Horseshoe Fitting Clips (x4) for the following models from Ford - 

FORD

Ford Anglia 105e      (1959- 68)

(997cc & 1200cc)

You get 4 here so that's enough for both sides.

These fit in the outside of the drum and hold the wheel cylinders in place, you will see them i f you put your head behind the rear wheel.

These can rust away or just get broken when you remove them.

Here's a new set of Front Brake Shoes (8" x 1.25") for the following models from Ford -  

FORD

Ford Anglia 105e   (** 997cc Only **)         (1959- 68)

(Suits Saloon & Estate)

(** Not for the 1200cc Anglia which used wider 8" x 1.75" front shoes - Measure first if unsure**).

Here's a new set of Rear Brake Shoes (8"x1.25") for the following models from Ford -

FORD

Ford Anglia 105e (997cc Only)        (1959- 68)

(** Only Suits 997cc versions of the Saloon & Estate **)

(** Not for the Super Anglia 1200 or the Super Anglia Estate 1200 which use wider 1.5" inch rear shoes).