Here's a new pair of Master Cylinder Covers (x2) for the following models from Triumph -

TRIUMPH

Triumph Spitfire (1962- 80)

(These suit the Clutch & Brake master cylinders).

These are the same for the clutch and the brake master cylinders, these are new and flexible - Not bloated, oil stained, stifff, brake fluid stained or split like they get after some time!

Apart from looking fine these prevent dust and corrosion building up on your master cylinders.

They also seal the bulkead when fitted so prevent water dripping down onto the pedals and making a puddle in the footwell.

Here's a new set of Front Brake Pads for the following models from Triumph -

TRIUMPH

Triumph GT6  (**1966- Dec 71 Only**)

(Mk1, Mk2 & Early Mk3)

(Up to KE/KF12389 in aprox Dec 71)

(These are the Imperial Pads fitted up to Dec 71 which can be identified by their 6.0mm diameter fitting pins).

(From Jan 72 onwards they used Metric Pads which can be identified by their 4.5mm diameter fitting pins).

Here's a new pair of Front Brake Discs (x2) for the following models from Triumph  -

TRIUMPH

Triumph GT6  2.0 Litre  (1966- 74)

 (Not for the Spitfire)
 

These are the same each side and easy to replace, no special tools required.

However it is recommended that you bolt the discs up using a Torque Wrench (32-35 lb/ft), this is to ensure the discs are bolted down evenly. Also recommended that you fit new brake pads at the same time. (See my other listing).

***    NOT AVAILABLE TO NORWAY , SWITZERLAND, MALTA , CYPRUS  ***

Here's a new pair of Front Brake Calipers (x2) for the following models from Triumph-

TRIUMPH

Triumph GT6 (Mk1, Mk2 & Mk3 Early)   (**1966- Dec 71 Only **)

(Up to Ch. KE12389, KF12390, KC5601977 in aprox Dec 1971)

These calipers come complete with the pistons and seals already assembled, they do not include Brake Pads or the Pad Fitting Pins / Shims. 

Not for cars after Dec 71 as the thread for the brake hose to go in changed to metric afterwards and the size of the pad locating pins was changed

These are 16pb Type calipers, your original calipers may be 16p Type which means the design of the seal around the piston is different.

These calipers are interchangeable and Triumph fitted both varieties on these models - there’s no difference in braking between them as the pistons are the same diamater.

If you just want one side - talk to me.

***    NOT AVAILABLE TO NORWAY , SWITZERLAND, MALTA , CYPRUS  ***