Here’s a new Head Gasket Set for the following models from MG-

(B Series Engines 1489cc & 1622cc).

MG

MG Magnette ZA     (1489cc)  (1953- 56)

MG Magnette ZB     (1489cc)  (1956- 58)

MG Magnette Mk4   (1622cc)  (1962-66 Only**)

  (** Different from 1966- **)

(For the 1600, only suits Engine Numbers 16AMW, 16GE & 16RA which are 3 bearing crank engines from 1961- 66)

(Not for 1600's with Engine Numbers 16AA, 16GF which are 5 bearing crank from 1966- )

Contains all the gaskets required to remove / Replace the Cylinder Head.

Check your engine number if you have the 1600cc. 

Here's a new Head Gasket Set & Sump Gasket Set (ENGINE GASKET SET) for the following models from MG-

MG

MG Magnette ZA, ZB & Mk3 (1489cc)  (1954- 58)

MG Magnette Mk3                 (1489cc)  (1959- 61)

(For the 1600, only suits Engine Numbers 16AMW, 16GE & 16RA which are 3 Bearing Crank engines from 1961- 66).

(Not for 1600's with Engine Numbers 16AA, 16GF which are 5 Bearing Crank from 1966- 71).

Check your engine number if you have the 1600cc. 

Here’s a new Engine Set of Piston Rings (STD, 5 Ring Type, 0.063"Wide) (Made in the USA by Grant) for the following models from MG –

(1489cc Engines Only)

MG

MG Magnette ZA            (1953- 56)

MG Magnette  ZB          (1956- 58)

MG Magnette MkIII       (1959- 61 Only)

*** These cars were fitted with either 4 Ring Pistons or 5 Ring Pistons. Get them out and look. This set is for the 5 Ring Pistons ***

*** These cars were fitted with a choice of two compression ring widths, either 0.063" or 0.078". Get them out and measure. This set is the for the 0.063"wide compression rings **

*** This set is STD (Standard Size), ensure you know the size you require before ordering **

This set contains four times - 

x3 Compression Rings 0.063" wide.

x2 Oil Rings 0.156" wide

The picture shows them in their packet as they are all in order.