Here's a new Clutch Master Cylinder & Slave Cylinder (3/4") for the following models from Ford -

FORD

Ford Cortina Mk1   (1200cc, 1500cc & GT)      (1962- 66)

(** Not for Lotus Models which uses a Large Bore slave cylinder **)

(** Not for Cortina Mk2 **)

(** DON'T BUY THIS FOR THE ELAN OR LOTUS CORTINA - IT IS NOT THE SAME **)

(** DON'T BUY THIS FOR THE CORTINA Mk2 - IT WON'T FIT. YOU WILL BE WASTING YOUR TIME **)

Here's a new pair of Front Brake Hoses (Stainless Steel Braided) (x2) for the following models from Ford -

FORD

Ford Cortina Mk1 (1962- 64)

(** With Front Drum Brakes**)

Here's a new set of Front (x4) & Rear (x2) Brake Wheel Cylinders (With Gaiters & Fitting Clips) for the following models from Ford -

FORD

Ford Cortina Mk1 (1200 & 1500) (1962- 66)

(**With Front Drum Brakes**)
 

These are new items and you get two left and two right on the front and a pair for the rear so you can replace all the cylinders at once.

Here’s a new Rear Brake Adjuster (x1) for the following models from Ford–

FORD

Ford Cortina Mk1  (1962 - Oct 66)

(** Not for the GT or Lotus **)

You need one per wheel, you are bidding for one here.

(These will only suit the REAR brakes, not for the front drums)

Here's a new Brake Master Cylinder (5/8") for the following models from Ford-

FORD

Ford Cortina Mk1 (1200 & 1500)  (1962- 64)

(** With Front Drums **)

Rod can be removed and swapped if required.

Better Quality than all the others i have seen listed - Look at the picture....

Here's a new pair of Front Copper 'Bridging' Brake Pipes (x2) for the following models from Ford -

FORD

Ford Cortina Mk1 (1200 Only)           (1962- 64)

(** With Front Drums ** )

Not for the 1500 which used large Front Drums.

These pipes join the Front Wheel Cylinders to each other on each front wheel.

These are made from copper which has been Flared professionally and have Brass unions fitted.

Note - I'll bend these a bit when I post them 

Here's a new Clutch Friction Plate (7.25" /. 184mm) (20 Spline) for the following models form Ford -

FORD

Ford Cortina Mk1 (1200, 1500 & 1500GT)       (1962- 66)

(** Not for Lotus Cortina Mk1 Models**)

(** Not for Cortina Mk2 which are all Completely different **)

(**Do Not buy this for any car other than the exact models I've written above**)