Here’s a new  pair of Engine Mounts (Made in UK) for the following BMC Farina models –

AUSTIN

Austin A60 Cambridge (1622cc)     (From  1961- 71)

(Petrol Engines only – Not Diesel)

The Engine Mounts on earlier 1500cc models and the Diesel versions are different - So see the picture and ensure your car is listed above.

Here's a new pair of Gearbox Mounts (x2) for the following models from Austin -

AUSTIN

Austin A40 Cambridge                          (1954- 57)
Austin A50 Cambridge                          (1954- 57)
Austin A55 Cambridge  (Mk1 & Mk2)   (1957- 61)

(Includes Saloon, Van & Pickup)

These are useful to reduce vibration or just to replace perished mounts.

If you have your gearbox out it is sensible to replace these mounts at the same time.

Here's a new pair of Gearbox Mount Side Buffers (x2) for the following models from Austin-

AUSTIN

Austin A40 Cambridge                          (1954- 57)
Austin A50 Cambridge                          (1954- 57)
Austin A55 Cambridge  (Mk1 & Mk2)   (1957- 61)

(Includes Saloon, Van & Pickup)

These are useful to reduce vibration or just to replace perished buffers.

You might also want the Gearbox Mounts - See my other items. 

If you have your gearbox out it is sensible to replace these mounts at the same time.

Here's a new Inlet / Exhaust Manifold Gasket for the following models from Austin -

AUSTIN

Austin A50 Cambridge (1489cc)        (1955- 57)

Austin A55 Cambridge (1489cc)        (1958- 61)

Here’s a new Head Gasket Set for the following models from Austin-

(B Series Engines 1489cc, 1622cc).

AUSTIN

Austin A50 Cambridge           (1489cc)                (1955- 57)

Austin A55 Cambridge Mk1  (1489cc)                (1957- 59)

Austin A60 Cambridge          (1622cc)                (1961- 66) (** Different from 66 **)

(Suits all 1500's) 

(For the 1600, only suits Engine Numbers 16AMW, 16GE & 16RA which are 3 bearing crank engines fitted up until 1966)

(Not for 1600's with Engine Numbers 16AA, 16GF which are 5 bearing engines fitted from 1966- )

Contains all the gaskets required to remove / Replace the Cylinder Head, check your engine number if you have the 1600cc. 

Here's a new Head Gasket Set & Sump Gasket Set (ENGINE GASKET SET) for the following models from Austin-

AUSTIN

Austin A50 Cambridge           (1489cc)         (1955- 57)

Austin A55 Cambridge Mk1  (1489cc)          (1957- 59)

Austin A60 Cambridge          (1622cc)          (1961- 66)

(** Different from 1966- **)

(Suits all 1500's) 

(For the 1600, only suits Engine Numbers 16AMW, 16GE & 16RA which are 3 Bearing Crank engines from 1961- 66).

(Not for 1600's with Engine Numbers 16AA, 16GF which are 5 Bearing Crank from 1966- 71).

Check your engine number if you have the 1600cc. 

Here’s a new Oil Filter for the following 4 Cylinder models from Austin -

AUSTIN

Austin A50 Cambridge            (1500cc)      (1954- 57)

Austin A55 Cambridge Mk1    (1500cc)      (1957- 59)

Austin A55 Cambridge Mk2    (1500cc)      (1959- 61)

(** Not for the Diesel versions **)

Here’s a new Engine Set of Piston Rings (STD, 5 Ring Type, 0.078"Wide) (Made in the USA by Grant) for the following models from Austin –

(1489cc Engines Only)

AUSTIN

Austin A50 Cambridge              (1954- 57)

Austin A55 Cambridge             (1957- 59)

*** These cars were fitted with either 4 Ring Pistons or 5 Ring Pistons. Get them out and look. This set is for the 5 Ring Pistons ***

*** These cars were fitted with a choice of two compression ring widths, either 0.063" or 0.078". Get them out and measure. This set is the for the 0.078"wide compression rings **

*** This set is STD (Standard Size), ensure you know the size you require before ordering **

This set contains four times - 

x3 Compression Rings 0.078" wide.

x2 Oil Rings 0.156" wide

The picture shows them in their packet as they are all in order.