Here'a new Clutch Hose Pipe for the following models from Austin -

AUSTIN / TAXI

Austin Taxi FX4     (**1960- 78 Only**)

Here's a new pair of Rear Brake Wheel Cylinders (1") for the following models from Taxi -   

AUSTIN TAXI

Austin Taxi  (**1959- Apr 82 Only**)

(FX4 2.25D) & (FL2 2.25D) 

** The above dates are important, read carefully ** 

Don't buy any old wheel cylinders just because they're cheaper and look the same - they won't be - These are the correct shape, correct bore, correct slot & correct thread. 

Here's a new pair of Universal Joints (x2) for the following models from Austin-

AUSTIN

Austin Taxi FX4  (2.5 Austin Engine)          (1959- 83)

These come complete with all the required circlips so it's an easy fitting job - these wear out fast and often need replacing.

Symptoms of worn joints are - A 'clonk' noise under power / pulling away OR continued clonking if the joints have deteriorated badly. 

Here’s a new set of Front Suspension Bushes (x12) for the following models from Taxi -

AUSTIN

Austin Taxi FX4         (1959- 89) 

Included in this kit are the following –

Lower Wishbone Bushes Inner (x8)

Top Trunnion Bushes (x4)

Here's a new pair of Front Brake Hoses (x2) for the following models from Taxi --

AUSTIN / TAXI

Austin Taxi FL2         (1959- 89)

Austin Taxi FX4         (1959- 89)

Reliant Metrocab       (1986- on)

(They are the same for left and right on all these models).  

Here's a new Rear Wheel Cylinder Fitting Kit for the following models from Austin-

AUSTIN TAXI

Austin Taxi  (1959- Apr 82 Only)

(FX4 2.25D) & (FL2 2.25D)  

Here's a new Duplex Timing Chain Kit for the following 4 Cylinder models from Austin -

AUSTIN

Austin FX4 Taxi    (2199cc)      (** From 1962- 73 **)

(** Not for any Diesel versions**)

Here's a new Sump Gasket Engine Set (Conversion Set) for the following 4 Cylinder models from Austin-

AUSTIN

Austin Taxi FL1, FL2, FX3 & FX4    (2199cc Petrol)      (** 1948- 73 **)

(** Not for any Diesel versions**)

Here's a new Set of Rear Brake Shoes for the following models from Austin -

AUSTIN

Austin Taxi FX4    (**1959- 89 Only**)

(** These will NOT fit on the Front**)

Here's a car set of Rear Brake Shoe Return Springs (x4) for the following models from Austin -

AUSTIN

Austin Taxi FX4     (1959- 89 Only) 

These are the Springs that pull the Brake Shoes together, you can see how they fit in the background picture.

Here's a new Rear Brake Adjuster (x1) for for the following models from Taxi -

AUSTIN

Austin Taxi FX4       (1959- 89)

Here’s a new Oil Filter for the following 4 Cylinder models from Austin / Taxi -

TAXI

Austin FX4 Taxi     (2199cc Petrol)      (1948- 73)

(** Not for any Diesel versions**)

Here's a new Water Pump & Gasket (Excluding Pulley) for the following models from Austin Healey -

AUSTIN HEALEY

Austin Healey BN1 BN2       (1953- 56)

(4 Cyl - 2660cc Petrol)  

***    NOT AVAILABLE TO NORWAY , SWITZERLAND, MALTA , CYPRUS  ***

Here's a new Clutch Friction Plate (9") for the following models from Taxi -

TAXI

Austin FX3 Taxi (PETROL)     (** Up to Ch. 151828 **)       (1948- 53 Only)

Austin FL3 Taxi (PETROL)     (** Up to Ch. 151828 **)       (1948- 53 Only)

(** Not for the Diesel **)

(** Different from1953 -59 **)

Here's a new set of Front Brake Shoes (11"x 2.25") for the following models from Taxi -  

AUSTIN

Austin Taxi FX4   (1959- 89 Only)

Get your old Brake Shoes out and measure them if your car is near a changeover date.

Here's a new Sump Gasket for the following 4 Cylinder models from Austin-

AUSTIN

Austin Taxi FL1, FL2, FX3 & FX4    (2199cc Petrol)      (** 1948- 73 **)

Here's a new Inlet / Exhaust Manifold Gasket for the following models from Austin -

AUSTIN

Austin Taxi FL1, FL2, FX3 & FX4    (2199cc Petrol)      (** 1948- 73 **)

Here's a new pair of Front Brake Hoses (Stainless Steel Braided) (x2) for the following models from Taxi --

AUSTIN / TAXI

Austin Taxi FL2         (1959- 89)

Austin Taxi FX4         (1959- 89)

Reliant Metrocab       (1986- on)

(They are the same for left and right on all these models).   

Here’s a new Oil Pressure Relief Spring & Valve Kit  for the following 4 Cylinder models from Austin-

AUSTIN

Austin Taxi FL1, FL2, FX3 & FX4    (2199cc Petrol)      (** 1948- 73 **)

This kit regulates the Engine Oil Pressure by stopping oil dropping back into the sump after it's been round the engine.

If you have low oil pressure this could be a very easy way to fix it. 

The Spring & Plunger are accessed by removing the a Nut on the side of the engine block - Usually just under the Distributor. 

Here’s a new set of Front Brake Adjusters (x4) for the following models from Taxi -

AUSTIN TAXI

Austin Taxi FX4        (1959- 89)

(** With Front Drums **)

You are bidding for an Axle set here (x2 per wheel).

Here's a new cork Rocker Head Gasket for the following models 4 Cylinder models from Austin -

AUSTIN

Austin Taxi FL1, FL2, FX3 & FX4    (2.2 Litre)      (** 1948- 73 **) 

(Suits Petrol & Diesel)

Here's a new set of (x4) Front Brake Wheel Cylinder Repair Seals Kits (1") for the following models from Austin / Taxi -

AUSTIN / TAXI

Austin Taxi FL2        (** 1958- Apr 82 Only **)

Austin Taxi FX4        (** 1958- Apr 82 Only **)

(Suits Petrol & Diesel Models)

Note - From Apr 1982 onwards they used smaller bore 7/8" Front Wheel  Cylinders. Measure if unsure.

Here's a new Rear Brake Hose (x1) for the following models from Taxi --

AUSTIN / TAXI

Austin Taxi FL2         (1959- 89)

Austin Taxi FX4         (1959- 89)

(x1 Rear Hose required per car - If you purchase x2 I'll assunme you want them and I'll send them both)  

Here's a new Rear Brake Hose (Stainless Steel Braided) (x1) for the following models from Taxi --

AUSTIN / TAXI

Austin Taxi FL2         (1959- 89)

Austin Taxi FX4         (1959- 89)

(x1 Rear Hose required per car - If you purchase x2 I'll assume you want them and I'll send them both)  

Here's a new pair of Front Intermediate Brake Hoses (x2) for the following models from Taxi --

AUSTIN / TAXI

Austin Taxi FL2         (1959- 89)

Austin Taxi FX4         (1959- 89)

(These are Intermediate Front Brake Hoses which means they are Not the hoses down by the wheel. They fit somewhere further up).

Here's a new Clutch Slave Cylinder (7/8") for the following models from Ausitn / Taxi -

AUSTIN / TAXI

Austin Taxi FX4 (2.5 Diesel)   (**1959- 82 Only**)

Austin Taxi FL2 (2.5 Diesel)   (**1959- 82 Only**)

(**Not for later 2.25 Diesel models**)