SUMP GASKET (Triumph Herald) (1959- 71)

SUMP GASKET (Triumph Herald) (1959- 71)
3.95
3.95 inc vat

Here's a new Sump Gasket for the following models from Triumph -

 

 

TRIUMPH

 

Triumph Herald 948cc   (All Years)

Triumph Herald 12/50    (All Years)

Triumph Herald 1200     (All Years)

Triumph Herald 13/60    (All Years)

Triumph Courier & Van  (All Years)

 

 

This gasket fits between the engine block and the oil sump, the oil sump is easy to unbolt and there it uses this simple rectangle shaped gasket.

 

If you take your engine apart you'll need to replace this gasket or if you have an oil leak the chances are the oil is coming from the place where this gasket fits.

 

When you are fitting this gasket you should ensure both surfaces are clean and free or old gasket. Don't overtighten the bolts and you should also be very careful with the front two as they are going into aluminium.

 

This gasket will be sent with cardboard to stop it bending, it only suits the above 4 cylinder models.

Quantity
STEERING COLUMN JOINT UPPER x1 (Jaguar Mk1, Mk2 & Daimler V8) (1955- 68)
ENGINE VALVE SPRINGS x8 (Triumph Dolomite 1850cc)
REAR SPRING EYE BUSHES x2 (Triumph Spitfire & GT6) (1962- 80)
STEERING COLUMN JOINT UPPER x1 (Jaguar Mk1, Mk2 & Daimler V8) (1955- 68) ENGINE VALVE SPRINGS x8 (Triumph Dolomite 1850cc) REAR SPRING EYE BUSHES x2 (Triumph Spitfire & GT6) (1962- 80)
10.00
13.50
6.50
 
CLUTCH RELEASE THRUST BEARING (Reliant Robin Rialto Regal Rebel Kitten Fox) (1962- 90)
REAR BRAKE WHEEL CYLINDER GAITERS x2 (Ford Cortina Mk1) (1200cc & 1500cc) (1962- 66)
WINDSCREEN FRAME RUBBER BASE SEAL (MGB & MGC Roadster) (1962- 80)
CLUTCH RELEASE THRUST BEARING (Reliant Robin Rialto Regal Rebel Kitten Fox) (1962- 90) REAR BRAKE WHEEL CYLINDER GAITERS x2 (Ford Cortina Mk1) (1200cc & 1500cc) (1962- 66) WINDSCREEN FRAME RUBBER BASE SEAL (MGB & MGC Roadster) (1962- 80)
11.50
3.75
9.50
 
BRAKE SHOE FITTING BEEHIVE SPRINGS (Front or Rear) x4 (Wolseley 6/80) (1948- 54)
BRAKE MASTER CYLINDER (Jaguar E Type) (Ser. 1, 3.8 Litre) (1961- 64)
BRAKE MASTER CYLINDER REPAIR SEALS KIT (Humber Super Snipe Mk4) (1952- 58)
BRAKE SHOE FITTING BEEHIVE SPRINGS (Front or Rear) x4 (Wolseley 6/80) (1948- 54) BRAKE MASTER CYLINDER (Jaguar E Type) (Ser. 1, 3.8 Litre) (1961- 64) BRAKE MASTER CYLINDER REPAIR SEALS KIT (Humber Super Snipe Mk4) (1952- 58)
4.75
57.00
14.50