RUBBER DOUGHNUTS for ROTOFLEX x2 (Triumph GT6)

RUBBER DOUGHNUTS for ROTOFLEX x2 (Triumph GT6)
67.00
67.00 inc vat

A pair of new Rubber Doughnuts (x2) for the following models from Triumph -

 

TRIUMPH

 

Triumph GT6 (Where Rotoflex is used)

 

(Not the same as Hillman Imp or Ice Crean Machine Coupling)
 

 

 

I'm selling them as a pair as it is usual to replace both sides simultaneously so you are bidding for a pair of them.

 

These Rubber Doughnuts are located on the inner ends of the driveshafts, they should be inspected twice yearly.

 

These Rubber Doughnuts come already 'compressed' with the steel bands round them.

 

 

To replace the Rubber Doughnuts -

 

1) Don't remove the band round the Doughnut

2) Remove the 6 bolts that go through the old Rubber Doughnut, turning the road wheel so each comes within easy reach

3) Remove the brake drum, central hub nut + washer. Mark the flanges so the new Doughnut can be fitted in exactly the same position as the old.

4) Press the outer drive shaft from the hub assembly (Churchill tool S109B is recommended).

5) Remove the stoneguard and spacer from the outer shaft.

6) Fit the new Doughnut by feeding the outer driveshaft through the new doughnut and secure it there with the 3 bolts.

7) Replace the stoneguard and spacer using a suitable drift.

9) Insert the threaded end of the shaft back into the hub and replace the hub nut with it's washer.

10) Put the other 3 bolts through the new doughnut so it is attached to the inner driveshaft.

11) Refit the brake drum then the other 3 bolts through the new doughnut so it is attached to the inner driveshaft.

12) Using a torque wrench tighten the bolts through the doughnut to a torque os 65-70 Lb/ft.

12) Remove the outer steel band that is around the outside of the doughnut.

13) Job done!!

Quantity
TRACK ROD ENDS x2 (Saab 95 & 96) (1960- 68)
CLUTCH HOSE PIPE x1 (MG Midget) (1275cc) (1966- 74)
HEAD GASKET SET (Reliant Robin Rialto Rebel Fox Regal)
TRACK ROD ENDS x2 (Saab 95 & 96) (1960- 68) CLUTCH HOSE PIPE x1 (MG Midget) (1275cc) (1966- 74) HEAD GASKET SET (Reliant Robin Rialto Rebel Fox Regal)
12.00
6.00
12.50
 
BRAKE MASTER CYLINDER REPAIR SEALS KIT (Wolseley 6/80) (1948- 54)
STEERING PIN & BUSH x2 (Jaguar MkX & 420)
BRAKE SERVO REPAIR SEALS KIT (MG C Mk2)  (From Mar 68 - 69 Only)
BRAKE MASTER CYLINDER REPAIR SEALS KIT (Wolseley 6/80) (1948- 54) STEERING PIN & BUSH x2 (Jaguar MkX & 420) BRAKE SERVO REPAIR SEALS KIT (MG C Mk2) (From Mar 68 - 69 Only)
12.50
17.00
125.00
 
STARTER RING GEAR (Wolseley 4/44) (1953- 56)
REAR BRAKE SHOE SPRINGS x4 (Austin 1800, 2200 & 3.0 Litre) (1964- 75)
FRONT BRAKE WHEEL CYLINDER REPAIR SEALS KITS x4 (Vauxhall Cresta) (E Series) (1 1/8") (1954- 55)
STARTER RING GEAR (Wolseley 4/44) (1953- 56) REAR BRAKE SHOE SPRINGS x4 (Austin 1800, 2200 & 3.0 Litre) (1964- 75) FRONT BRAKE WHEEL CYLINDER REPAIR SEALS KITS x4 (Vauxhall Cresta) (E Series) (1 1/8") (1954- 55)
35.00
8.50
10.00