Home :: Classic Car Parts :: Triumph Car Parts :: Triumph Spitfire & GT6 Parts :: ENGINE, GEARBOX & DRIVELINE PARTS Triumph Spitfire & GT6 :: ENGINE VALVE SPRINGS x8 (Triumph Spitfire Mk1, Mk2, Mk3 & MkIV Early)

ENGINE VALVE SPRINGS x8 (Triumph Spitfire Mk1, Mk2, Mk3 & MkIV Early)

ENGINE VALVE SPRINGS x8 (Triumph Spitfire Mk1, Mk2, Mk3 & MkIV Early)
11.50
11.50 inc vat

Here's a complete set of Single Valve Springs for the following models from Triumph -

 

 

TRIUMPH



Triumph Spitfire Mk1 (1147cc)

Triumph Spitfire Mk2 (1147cc)

Triumph Spitfire Mk3 (1300cc)

Triumph Spitfire MkIV (1300cc)

 

(Only up to engine number FH25000e, they use a double spring after that).

 

 

You get 8 single springs here which is enough for one engine (x4 Inlet and x4 exhaust), the photo shows 8 springs in a packet.

 

You replace these springs when the Cylinder Head is removed and use the correct tool to compress the old springs, remove the collets and then to refit the new springs.

 

Replacing these springs is really very worthwhile, the springs will have weakenned with age and some can even break. The results are problems running at medium / high revs and possibly burnt out / leaking valves.

Quantity
REAR BRAKE PAD FITTING KIT (Facel Vega HK500 & Excellence) (1960- 64)
FRONT BRAKE CALIPER PISTONS x2 (Triumph Vitesse 2.0 Litre) (1966- 71)
FRONT BRAKE PADS SET (MGA 1600) (Mk1 & Mk2) (1959- 62)
REAR BRAKE PAD FITTING KIT (Facel Vega HK500 & Excellence) (1960- 64) FRONT BRAKE CALIPER PISTONS x2 (Triumph Vitesse 2.0 Litre) (1966- 71) FRONT BRAKE PADS SET (MGA 1600) (Mk1 & Mk2) (1959- 62)
27.00
12.50
14.00
 
HEAD GASKET SET (Triumph 2500 & 2.5pi)    (Aug 1971- )
REAR BRAKE HOSE x1 (Austin A40 Mk2 Farina) (1961- 68)
REAR BRAKE WHEEL CYLINDER REPAIR SEALS KITS x2 (Riley 2.6) (1957- 59)
HEAD GASKET SET (Triumph 2500 & 2.5pi) (Aug 1971- ) REAR BRAKE HOSE x1 (Austin A40 Mk2 Farina) (1961- 68) REAR BRAKE WHEEL CYLINDER REPAIR SEALS KITS x2 (Riley 2.6) (1957- 59)
15.00
6.00
16.00
 
CLUTCH SLAVE CYLINDER REPAIR SEALS KIT (Humber Super Snipe) (1958- Onwards)
CLUTCH MASTER CYLINDER SEALS REPAIR KIT (Reliant Scimitar 3.0) (SE5a & SE6) (1973- 76)
LOWER BALL JOINTS x2 (Jaguar Mk2 & S Type) (1959- 69)
CLUTCH SLAVE CYLINDER REPAIR SEALS KIT (Humber Super Snipe) (1958- Onwards) CLUTCH MASTER CYLINDER SEALS REPAIR KIT (Reliant Scimitar 3.0) (SE5a & SE6) (1973- 76) LOWER BALL JOINTS x2 (Jaguar Mk2 & S Type) (1959- 69)
5.50
5.75
17.00