CORE PLUG ENGINE SET (Triumph GT6) (1966- 74)

CORE PLUG ENGINE SET (Triumph GT6) (1966- 74)
6.75
6.75 inc vat

Here's a new Core Plug Set for the following 6 cylinder models models from Triumph -

 

 

TRIUMPH

 

Triumph GT6
 

 

These plugs are pressed into the engine block to fill up holes left when manufacturing the engine.

 

After a long time they rust and you start to leak water, if you keep your car full of Anti-Freeze this helps protect them against rust.

 

It's very easy to change these, to remove the old ones you knock a sharp scredriver through the old core plug and lever it out. You then press the new core plug into the block, put a flat bit of wood over if and hit it home! (You'll need to drain the water out of the engine / radiator first!)

Quantity
REAR BRAKE HOSE x1 (Morris Oxford) (Ser 2,3) (1954- 59)
STARTER RING GEAR (Morris 10/4) (Series M) (1938- 48)
FRONT BRAKE CALIPER PISTONS & SEALS x6 (Rover P6 V8 3500) (1968- 77)
REAR BRAKE HOSE x1 (Morris Oxford) (Ser 2,3) (1954- 59) STARTER RING GEAR (Morris 10/4) (Series M) (1938- 48) FRONT BRAKE CALIPER PISTONS & SEALS x6 (Rover P6 V8 3500) (1968- 77)
7.00
36.00
68.00
 
FRONT SHOCK ABSORBERS DAMPERS x2 (Triumph Herald & Vitesse) (**ALL METAL**) (1959- 71)
TOP BALL JOINTS x2 (TVR 1600M 2500M, 300M & Taimar) (1972- 79)
CLUTCH MASTER CYLINDER REPAIR SEALS KIT (Austin / Morris - 1100 / 1300)
FRONT SHOCK ABSORBERS DAMPERS x2 (Triumph Herald & Vitesse) (**ALL METAL**) (1959- 71) TOP BALL JOINTS x2 (TVR 1600M 2500M, 300M & Taimar) (1972- 79) CLUTCH MASTER CYLINDER REPAIR SEALS KIT (Austin / Morris - 1100 / 1300)
40.00
13.00
6.50
 
REAR BRAKE WHEEL CYLINDERS x2 (Reliant Scimitar 3.0 Gte) (1975- Jul 76)
IGNITION HT LEADS SET (Triumph GT6) (1966- 74)
FRONT BRAKE CALIPER PISTONS x2 (Triumph TR4a TR5 TR6)  (** 16P **) (1965- 76)
REAR BRAKE WHEEL CYLINDERS x2 (Reliant Scimitar 3.0 Gte) (1975- Jul 76) IGNITION HT LEADS SET (Triumph GT6) (1966- 74) FRONT BRAKE CALIPER PISTONS x2 (Triumph TR4a TR5 TR6) (** 16P **) (1965- 76)
28.00
11.00
11.50